Скачать SpeedFan 4.35 Final

SpeedFan - бесплатная программа, которая следит за температурой, скоростью движения кулера и напряжением. SpeedFan также может отображать температуру жесткого диска, если устройство поддерживает эту опцию. Однако, главной функцией SpeedFan является наблюдение за скоростью вращения кулера и ее изменение в зависимости от температуры внутри компьютера. Это помогает уменьшить шум и потребление электроэнергии.

Что нового в 4.35 Final:

* released to the public the EXOTICS tab
* fixed 120 DPI issue in CONFIGURE dialog
* added full support for Areca RAID controllers
* greatly improved SCSI support
* added support for Abit uGuru 3 (uGuru 2005)
* added full support for Intel FB-DIMM temperature readings
* added full support for ITE IT8720F
* added full support for Andigilog aSC7611
* added full support for LM96000 (it was previously detected as LM85B)
* added full support for Analog Devices ADT7490
* added full support for SMSC SCH5327
* fixed Windbond W83766HG hardware monitor detection on some Asus motherboards
* improved CPU identification routines
* added support for a new revision of the WINBOND W83637HF
* added support for WINBOND W83637HF at unusual addresses
* added support for Asus F8000 at unusual addresses
* added identification of the SMSC SCH5514
* added identification of SMSC EMC2300
* added ITE IT8718F fifth fan speed reporting
* added identification of Analog Devices ADP3228
* added identification of ITE IT8512F
* added identification of Winbond W83667HG SuperIO chip
* identified a new revision of Fintek F71872 hardware monitor subsystem
* added preliminary detection of the HECI driver
* fixed a bug in SMSC LPC47M172 support code that prevented fan speeds to be properly reported
* 45nm Intel CPUs with CPUID=0x10676 now use a Tjmax value of either 105C or 90C
* added full support for nVidia MCP65 SMBus
* added full support for nVidia MCP67 SMBus
* added full support for nVidia MCP73 SMBus
* added full support for nVidia MCP78S SMBus
* added full support for VIA CX700M SMBus
* added full support for Intel 82801JIB SMBus
* fixed an issue where the Intel SMBus couldn't be accessed and messages like SMBus msg : SMB Error $14 : FAILED (50) were generated
* enabled Intel ICH8M-E SMBus device, if needed
* enabled 631xESB SMBus, if needed
* enabled SMBus on Intel ICH9R, if needed
* preliminary detection of AMD CD5536 SMBus
* some SMBus addresses on Asus Striker Extreme are no longer scanned
* SMBus is no longer scanned at address $2E on DELL XPS710
* Tyan S2927 second SMBus is no longer scanned
* some addresses on the SMBus of Asus P5NT WS are no longer scanned
* some addresses on the SMBus of the Intel DX38BT are no longer scanned
* some SMBus addresses are no longer scanned on Asus M2N32-SLI DELUXE
* the second nForce SMBus is no longer scanned on FIC AU31
* some addresses on the SMBus of Supermicro H8DCE are no longer scanned
* added some SMBus scan exclusions for Intel D5400XS
* added /NOGIVEIO command line parameter to disable access to giveio.sys
* added /NOGEFORCEROM command line switch that will prevent SpeedFan from reading nVidia GeForce ROMs (useful if it takes too much time)
* nVidia video BIOS is now stored in a file for later retrieval
* fixed an access violation under Win9x with some nVidia video cards
* battery status messages are no longer displayed
* upon resume, all controlled fans are set to 100% for half a second, then set to their minimum fan speed
* added new configuration option SHOWSTATICICON
* enabled Intel 6300ESB SMBus if needed

Размер: 1.5 Mb